monitor my signal quality.
Ariel NY4G
Sent from Windows Mail
From: aj4tf
Sent: July 19, 2013 8:29 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K2] set-up for PSK31
As Don said, you're overdriving your radio. Your signal may have some
intermodulation products
As Don said, you're overdriving your radio. Your signal may have some
intermodulation products on it, which might explain why you're not getting
any responses. When I see a bad signal I usually DO respond and let the
operator know they have a problem with their setup.. as I would hope someone
woul
Ariel
The K2 ALC indication is *not* the same as the K3 or KX3. With the K2,
you want NO ALC bars.
You are overdriving. Back off the audio drive until the last ALC bar
just goes out.
You should also check that compression is set to 1:1 (menu SSBC = 1-1).
An advantage of using RTTY mode is
I played with the ALC to just get the onset of ALC but no luck
Ariel NY4G
Sent from my iPhone
On Jul 19, 2013, at 1:11 AM, "Ariel Jacala" wrote:
> I need help in understanding why no one can seem to hear me on PSK with my K2
>
> I am using Signalink USB
>
> RF is going out with PWR set to le
I need help in understanding why no one can seem to hear me on PSK with my K2
I am using Signalink USB
RF is going out with PWR set to less than 25 watts
Monitoring the TX - I can hear the modulation of the side band through a
headphone and it seems to sound normal
I have mode set to USB
I am
5 matches
Mail list logo
