I also noticed this the other day when I was messing about with the RF
Gain Calibration and then wanted to recheck the S-meter calibration.
Thought I probably had a button-push sequence messed up, but I wasn't
able to finish the job for the SubRx.
73,
Ken K3IU
Mike
There is an error in the manual according to Wayne and you cannot calibrate
the sub rx S-meter.
John N1JM
Mike Harris wrote:
G'day,
Has anyone managed to use the proceedure in the handbook to
calibrater the sub-rx s-meter?
The metering is switched over to the sub-rx when in b SET
The S-meter Cal procedure in the manual worked up until about v.3.15 or
so. Now I am pretty sure that it was NOT separately adjusting the SubRx
S-meter, but I never checked, so I'm not sure. It doesn't really matter now.
I have determined that, at least on my K3 (#202) running v3.41 et al,
: Wednesday, October 07, 2009 12:22 PM
Subject: Re: [Elecraft] [K3] Sub RX S-meter cal
The S-meter Cal procedure in the manual worked up until about
v.3.15 or
so. Now I am pretty sure that it was NOT separately adjusting the
SubRx
S-meter, but I never checked, so I'm not sure. It doesn't really
Message -
From: Ken K3IU kenk...@cox.net
To: N1JM johnn...@gmail.com
Cc: elecraft@mailman.qth.net
Sent: Wednesday, October 07, 2009 12:22 PM
Subject: Re: [Elecraft] [K3] Sub RX S-meter cal
The S-meter Cal procedure in the manual worked up until about
v.3.15 or
so. Now I am pretty sure
G'day,
Has anyone managed to use the proceedure in the handbook to
calibrater the sub-rx s-meter?
The metering is switched over to the sub-rx when in b SET mode.
However, as soon at you go into CONFIG the s-meter reverts to the
main rx making callibration impossible. This can be checked by
6 matches
Mail list logo