Re: [Elecraft] [KX3] DATA A v SSB maximum receiver bandwidth not as wide.

Have you tried switching to the high/low cut mode instead of center and width? wunder K6WRU CM87wj http://observer.wunderwood.org/ (my blog) On Aug 1, 2015, at 10:49 AM, David Anderson gm4...@yahoo.co.uk wrote: No reply from Elecraft on this matter received so far. So you don't have to read

Re: [Elecraft] [KX3] DATA A v SSB maximum receiver bandwidth not as wide.

No reply from Elecraft on this matter received so far. So you don't have to read through the details, it is a simple question: Why can the RX bandwidth not be made as wide on DATA A mode as it can on SSB mode? If it can be made to widen out as far let me know what I am missing please. The

Re: [Elecraft] [KX3] DATA A v SSB maximum receiver bandwidth not as wide.

of code.) 73 from Ian GM3SEK -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David Anderson Sent: 29 July 2015 22:28 To: Elecraft Reflector Subject: [Elecraft] [KX3] DATA A v SSB maximum receiver bandwidth not as wide. Experimenting with the KX3

[Elecraft] [KX3] DATA A v SSB maximum receiver bandwidth not as wide.

Experimenting with the KX3 on WSJT FSK441 and JT65b I noticed looking at the spectral display of band noise that with the bandwidth widened fully out on DATA A Mode that even though it was displaying 4 KHz on the KX3 LCD, the bandwidth of the audio was less, like 400 Hz to 3600 Hz. On SSB