This may not apply to Gary Hawkins' situation with his KX3, but I
have the situation where I get no Tx audio drive to my K3 in digital
modes from the soundcard. Turns out that my XP32 computer is not
doing a handshake at power-up with my emu-0202. Cure is to cycle the
power on the emu0202 to
Gary,
Since you get no ALC bars when the fault occurs, the problem is either
in your Signalink or the audio input section of the KX3.
It could be as simple as an intermittent audio cable connection or a
fault in the audio wire.
If you have an audio amplifier available (like one of those used wi
While your test using a dummy load seem reasonable and correct, it would
appear as though you may have an excessive amount of Common Mode current
on the feed line, not being seen by the SWR indication in the radio. I
suggest a Common Mode choke on and at the output of the radio. Perhaps
a fau
Just as background, this digital setup has been working successfully for
several weeks and as I mentioned in another post I've recently had over
170 contacts in both JT65/JT9 running 5 or 10W (my KX3 has 3rd third
party heatsink). The ALC was appropriately set based on information Don
provided
4 matches
Mail list logo