I am assembling the KAT2 auto tuner. Everything is going OK but I am having
trouble with the following statement:
'On the bottom of the KAT2 control board, locate a pad labeled B. Just to the
left of this pad you'll
see the round pad for pin 1 of U4 (LM358). (You'll know you have the
Measure at U4 pin 1.
73,
Don W3FPR
On 2/16/2012 1:31 PM, b.den...@comcast.net wrote:
I am assembling the KAT2 auto tuner. Everything is going OK but I am having
trouble with the following statement:
'On the bottom of the KAT2 control board, locate a pad labeled B. Just to
the left of
Don Wilhelm-4 wrote
Measure at U4 pin 1.
Which is the small round soldered pad southwest of the B (BTW not upside
down). I just went through this myself. Sometimes writer's directions
remind me of my XYL's...she forgets that right and left depend on which way
you're driving on the road!
Which is exactly why one should always use a pre-determined common frame of
reference. In the fire service, it wasn't left flank of the fire, it was
the [N/S/W/E] flank.
On radios, it should start with something akin to With the front panel
towards you. Most of the time Elecraft has already
Thanks Don and to all who responded.
Brian KB1VBF
- Original Message -
From: Don Wilhelm w3...@embarqmail.com
To: b denley b.den...@comcast.net
Cc: Elecraft@mailman.qth.net
Sent: Thursday, February 16, 2012 1:49:28 PM
Subject: Re: [Elecraft] K2: KAT2 Assembly
Measure
5 matches
Mail list logo
