Doesn't look like it'll fit... Where as the Tamura has 3 possible pins
on a side at .01 spacing the Bourns part has 4 possible pin locations
per side at the same .01 spacing... So they aren't going to be pretty
drop in replacements.'
~Brett (N7MG)
On Sat, Jul 3, 2010 at 4:48 AM, Paul Christensen
My recent K3 has Bournes transformers on the KIO3A board.
73, Pete N4ZR
The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at
reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000
On 7/3/2
> So the K3 has a fully floating ground on the line audio input, isolated
> from
> the chassis??? Is that correct? 73 Tom
The K3's line input transformer primary is connected to the 1/8" TRS jack
using tip and sleeve where the sleeve floats above chassis ground.
The on-line schematic of the KIO
So the K3 has a fully floating ground on the line audio input, isolated from
the chassis??? Is that correct?
73 Tom
- Original Message -
From: "Edward R Cole"
To:
Sent: Saturday, July 03, 2010 4:08 AM
Subject: [Elecraft] WJST and the K3
> Bill, W5WVO gave a very d
From: Lee Buller
Subject: [Elecraft] WJST and the K3
To: Elecraft Reflector
Message-ID: <351288.93695...@web81308.mail.mud.yahoo.com>
Content-Type: text/plain; charset=us-ascii
OK I got the 6 meter bug...as you all know by now
I have been trying to set up WJST for the K3. Can
luck! Hope to see
you on PJ one of these days.
Bill W5WVO
--
From: "Lee Buller"
Sent: Friday, July 02, 2010 11:14 AM
To: "Elecraft Reflector"
Subject: [Elecraft] WJST and the K3
>
> OK I got the 6 meter bug...as you all know by now
>
Lee,
99% of all digi modes are on USB, However I use the digi mode on the K3.
In WSJT program Go to setup , Option , then select your com port.
GL 73 Ken K5DNL
-
--- On Fri, 7/2/10, Lee Buller wrote:
> From: Lee Buller
> Subject: [Elecraft] WJ
OK I got the 6 meter bug...as you all know by now
I have been trying to set up WJST for the K3. Can anyone send me some
information as to how to do this? I am under the impression that it needs to
be on SSB - but can't find information on which sideband. How do you key the
rig on S
8 matches
Mail list logo
