A relatively quick fix... I looked with my 'scope and saw the oscillator peter out with the dial set to around 1925 ... a couple counterclockwise turns of L30 snapped it right into place.
No issues on any other bands. Took the opportunity while the rig was open to re-cal the PLL, re-set some filters, tighten the PA screws on the KPA100. I used the 10 MHz oven output (from a frequncy counter from work) to snug up the internal counter. Rig is on frequency, every frequency. Incedentally, it puts out around 140W on 160, according to the LP100. Thanks for the assist. Steve KZ1X/4 ____________________________________________________________________________________ Now that's room service! Choose from over 150,000 hotels in 45,000 destinations on Yahoo! Travel to find your fit. http://farechase.yahoo.com/promo-generic-14795097 _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
