Re: [Elecraft] 432 transverter?

2018-07-31 Thread Don Wilhelm
Will, Several of the critical components of the XV432 are no longer available through reliable sources forcing it to be discontinued. I doubt that you will see a re-design in the near future. 73, Don W3FPR On 7/31/2018 9:08 AM, WILLIE BABER wrote: I guess Elecraft suspended the production

[Elecraft] 432 transverter?

2018-07-31 Thread WILLIE BABER
I guess Elecraft suspended the production of its 432 transverter kt...I went looking to possible purchase one, and it is not listed. Any information as to whether it will be produced again? 73, Will, wj9b CWops #1085 CWA Advisor levels II and III http://cwops.org/

Re: [Elecraft] 432 transverter with 2m transverter and satellites

2005-10-20 Thread Nick Waterman
VR2BrettGraham wrote: whether you can change the frequency using the FA; and FB; commands while transmitting - this is essential. The K2 cannot do this. More than that - you can't QSY whilst transmitting. Pretty sure that most of the digital control side of the K2 goes into sleep mode

[Elecraft] 432 transverter with 2m transverter and satellites

2005-10-18 Thread Rick Tilton
I guess this question is too early but will there be any type of software or hardware interface to put between two K2's or between a 432 and 2m transverter with ONE K2 so that you maybe able to perform inverting and non inverting on the satellites to allow proper tracking of two frequencies?

Re: [Elecraft] 432 transverter with 2m transverter and satellites

2005-10-18 Thread Simon Brown
There are quite a few considerations when working with satellites, here's my opinion which is a bit terse as my back hurts and I want to get on with some new code. Ideally you will have two K2's or a K2 and a good second receiver. Myself I have the IC-7800 and IC-703 and will never own the K2

Re: [Elecraft] 432 transverter with 2m transverter and satellites

2005-10-18 Thread Brian Mury
On Tue, 2005-10-18 at 13:45 +0100, Simon Brown wrote: Regarding software: solutions exist, the big thing to check with the K2 is whether you can change the frequency using the FA; and FB; commands while transmitting - this is essential. The K2 cannot do this.

Re: [Elecraft] 432 transverter with 2m transverter and satellites

2005-10-18 Thread Simon Brown
Then for satellites you are sadly stuffed. But I guess this is a firmware issue which could be 'resolved'. I understand why this may be so, anyway I suggest you band on the door of Eric ever so politely :-) Simon Brown, HB9DRV --- www.hb9drv.ch, www.laax.ch - Original Message - From:

RE: [Elecraft] 432 Transverter availablity?

2005-01-13 Thread Simon Lewis
[EMAIL PROTECTED] To: Elecraft@mailman.qth.net Subject: [Elecraft] 432 Transverter availablity? Date: Wed, 12 Jan 2005 17:44:28 -0500 Hello all, My curiousity has gotten the better of me and I have to ask. Is there any word on when a 432 MHz transverter will be available? I believe that I heard

[Elecraft] 432 Transverter availablity?

2005-01-12 Thread Doug Shields
Hello all, My curiousity has gotten the better of me and I have to ask. Is there any word on when a 432 MHz transverter will be available? I believe that I heard somewhere that they were working on it. Any ideas? Doug W4DAS ___ Elecraft