RE: [Elecraft] ATU K2 Question

2006-07-07 Thread Solosko, Robert B (Bob)
ehalf Of Don Wilhelm Sent: Friday, July 07, 2006 9:30 AM To: John Bahun; Elecraft@mailman.qth.net Subject: RE: [Elecraft] ATU K2 Question The KAT100 uses a cable to connect it to the K2, and that cable plugs into either the KPA100 AUX I/O or the AUX I/O connector in the QRP lid. So the answer is ye

RE: [Elecraft] ATU K2 Question

2006-07-07 Thread Don Wilhelm
The KAT100 uses a cable to connect it to the K2, and that cable plugs into either the KPA100 AUX I/O or the AUX I/O connector in the QRP lid. So the answer is yes if and only if you have the KIO2 installed in the QRP lid. If you do not have the KIO2, then you will have to wait until you build up

[Elecraft] ATU K2 Question

2006-07-07 Thread John Bahun
I have completed my basic QRP K2. I have the KAT100 tuner. My question is this... Can I use the KAT100 tuner in QRP mode without adding the 100 Watt Amplifier? Or should I build the 100 Watt Module and then build the KAT100 Tuner? TIA Jb John J. Bahun DTS Engineer CoreOS/Hardware A