Mike
I use the MFJ 994B tuner with an ALS-600 amp. I used the same setup with
my K2 and have had no problems. Now that the MFJ-998 tuner is available I
would pop for the extra capacity if I had it to do over. The 998 will
automatically lock out the amp when the tuner is tuning.
The unfortun
.
Good luck and 73
Bob N6WG
- Original Message -
From: "AD6XY - Mike" <[EMAIL PROTECTED]>
To:
Sent: Saturday, March 15, 2008 5:49 AM
Subject: Re: [Elecraft] Auto ATU for K3 + Amplifier
>
>
> Thanks for the responses so far. I am currently using a Z11 auto
tuner at
&
ike" <[EMAIL PROTECTED]>
To:
Sent: Saturday, March 15, 2008 6:49 AM
Subject: Re: [Elecraft] Auto ATU for K3 + Amplifier
Thanks for the responses so far. I am currently using a
Z11 auto tuner at
10W.
Can anyone help me with a configuration setting? What I
would like to happen
is f
Oop... sorry about the double negative. It should say...
"If you don't have the KAT3 installed, I don't think that tapping the
"ATU TUNE" button is gonna do anything for you."
73, Ken K3IU
Ken K3IU wrote:
Hi Mike:
If you don't have the KAT3 installed, I don't think that tapping the
"ATU TUNE
Hi Mike:
If you don't have the KAT3 installed, I don't think that tapping the
"ATU TUNE" button is not gonna do anything for you. However, just to the
left of that is the XMIT/TUNE button. In the menu system you can specify
the amount of power that will be produced when you press/hold TUNE. A
Thanks for the responses so far. I am currently using a Z11 auto tuner at
10W.
Can anyone help me with a configuration setting? What I would like to happen
is for something useful to happen when I press the ATU Tune button on the
K3. What it should do is provide a low power signal and toggle a t
I use the LDG AT-1000pro with my K2 and Tokyo Hy-Power amp and it works out
for me very well. You can check out the specs on their web site. It will
handle up to 1 KW.
73,
John, WA6L
AD6XY - Mike wrote:
>
> Any advice on which automatic ATU would match well to a K3 with an
> amplifier (sol
I've been using a MFJ-994B with my ALS-600 for about two years, and it has
worked great (used it with my Yaesu MKV). I've recently upgraded to the
MFJ-998 because it has a digital readout, and an amplifier bypass feature
(now using with my K3). I had modified my ARB-704 with an amp-bypass
fea
Any advice on which automatic ATU would match well to a K3 with an amplifier
(solid state) to around the 500W level?
--
View this message in context:
http://www.nabble.com/Auto-ATU-for-K3-%2B-Amplifier-tp16048136p16048136.html
Sent from the Elecraft mailing list archive at Nabble.com.
9 matches
Mail list logo