Ed,
You probably already now this, but other K3 or KX3 users may not. Until there
is a single command for changing between the K3's front panel mic jack, the
rear panel mic jack or the rear panel line in, the way to make the switch is to
use one of these macros.
Mic Input - Front Panel: MN053;
I know a number of us would be very pleased with the microphone
selection being able to be set to a known state for H/L and the Bias
ON/OFF. I can sure see with the Elecraft macros dealing with these
toggle situations on an individual basis vs. over-all make sense and I
am sure easier to imple
The microphone selection, please.
Pf
> "Wayne" == Wayne Burdick writes:
Wayne> Ed,
Wayne> The switch emulation commands provide a method of activating
functions
Wayne> for which there are not yet "direct" commands. In many cases both
Wayne> methods are available. For exam
I don't know what your application development background is, so if I
seem to be talking down to you, or anyone else, for that matter,
please don't take it personal.
You can have a good amount of control over the K3 with MACRO's, but
you can only have fine grained control by developing applicatio
Ed,
The switch emulation commands provide a method of activating functions
for which there are not yet "direct" commands. In many cases both
methods are available. For example, you can turn the preamp on/off
with a switch emulation, which toggles, but there's also a separate
command for t
It's crossed my mind from time to time when tackling issues like that
how nice it would be to have an Elecraft MIB and SNMP control. Think of
all the commercial & open source software and libraries that would
instantly be available. It's always easy to daydream when you're not
doing the work.
al Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of W0SD Ed Gray
Sent: Friday, December 07, 2012 11:07 AM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] Big weakness in Macro's
IMHO there is a big need for a command that can be use to de
IMHO there is a big need for a command that can be use to define things
back to the same state. One big rule in programming is you always set
the state of things so you are always dealing with a known starting
point. The command structure in the K3 does not permit this.
A number of things in t
8 matches
Mail list logo
