Tom and Don,
I think the problem has cured itself. Now only the ant1 external meter
reads power when ant1 is selected. Before both ant1 and ant2 were reading
power when ant1 was selected. There's no indicator on ant1, just on
ant2. I was mistaken about that. Tnx for the response.
At 07:
Chas,
Look for a short between either pins 2 and 3 or pins 8 and 9 of KAT2 K18.
As you have concluded, a short batween those points or a faulty relay is the
only thing that could allow output on ANT 1 when ANT2 is selected.
But OTOH, if the indicator says ANT 1 in all cases, that indicates a prob
Hi,
One of the relays in my KAT2 is stuck or a relay contact is shorted. When
you select antenna 1 it is ok. When you select antenna 2 both antennas are
selected (bad), and the indicator stays on Ant1. I guess replacing the
relay is necessary. I don't know why it stuck. I first noticed it this
3 matches
Mail list logo