Hi all,
The K3, KX3 and KAT500 tuners use an L-C network with a series L and a parallel
C. It can be configured with the shunt C on the transmitter side or the antenna
side.
I can write the transfer functions for both of these configurations (both being
low pass, as pointed out by K9YC), one
Fred,
Yes, it has everything to do with the impedance range to be matched.
In general, if the impedance is less than 50 ohms, the capacitor will be
on the TX side, but if th eimpedance is greater than 50 ohms, it will be
on the feedline side.
Look at the equations and conditions for an
Of course.
On 8/20/2013 10:57 AM, Cady, Fred wrote:
Hi all,
The K3, KX3 and KAT500 tuners use an L-C network with a series L and a parallel
C. It can be configured with the shunt C on the transmitter side or the antenna
side.
I can write the transfer functions for both of these configurations
3 matches
Mail list logo