Eric, W3DQ wrote: I bought an early K3 (s/n 525). I believe I know which
mods were done (everything through September/October 2009), but I'm not sure
exactly sure of it, nor where the previous owner stopped, where I should
pick up and what is worth or not worth doing.
Eric, if the K3 does not
Eric,
Most of the K3 mod instructions contain some method of determining
whether they have been applied or not. I would suggest you go the the
Elecraft website and download the instructions for all the mods, and
then check your K3. For some of the mods, you will have to do a
physical
bulletins with a label affixed to the rear of the K3.
Paul, W9AC
- Original Message -
From: Don Wilhelm w3...@embarqmail.com
To: Eric Rosenberg ericrosenberg...@gmail.com
Cc: elecraft@mailman.qth.net
Sent: Saturday, July 03, 2010 9:17 AM
Subject: Re: [Elecraft] Chasing the Update Mods Train
been changed is only as good as the accuracy of what's being input by the
owner or Elecraft Service.
Pau, W9AC
- Original Message -
From: Paul Christensen w...@arrl.net
To: elecraft@mailman.qth.net
Sent: Saturday, July 03, 2010 10:07 AM
Subject: Re: [Elecraft] Chasing the Update Mods
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Chasing the Update Mods Train?
For the K3, there are now close to 20 upgrade bulletins from Elecraft. It
may make sense to number the bulletins in Collins fashion (e.g., SB-1).
It's a lot easier to track and document changes by number, rather than
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Paul Christensen
Sent: Saturday, July 03, 2010 8:07 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Chasing the Update Mods Train?
For the K3, there are now close
The problem with stickers or EEPROM records is that the K3 is
modular. What if a KIO3 is replaced? Or the DSP board swapped? or...
Since the mods are applied to various boards, you really need to track
them board by board. It quickly becomes very cumbersome to manage and
ensure
...@wavecable.com
To: elecraft@mailman.qth.net
Sent: Saturday, July 03, 2010 11:48 AM
Subject: Re: [Elecraft] Chasing the Update Mods Train?
The problem with stickers or EEPROM records is that the K3 is
modular. What if a KIO3 is replaced? Or the DSP board swapped? or...
Since the mods are applied
.
Thanks 73
Doug Joyce, VE3MV
From: w...@arrl.net
To: k...@wavecable.com; elecraft@mailman.qth.net
Date: Sat, 3 Jul 2010 13:55:23 -0400
Subject: Re: [Elecraft] Chasing the Update Mods Train?
Lyle,
But if the mod is referenced by service bulletin number (e.g., SB-1), that
would
I bought an early K3 (s/n 525). I believe I know which mods were done
(everything through September/October 2009), but I'm not sure exactly
sure of it, nor where the previous owner stopped, where I should pick up
and what is worth or not worth doing.
Any advice on how to figure out the next
10 matches
Mail list logo