Well use your DMM and measure the resistance of your power cord. Then
look at the current consumption of the K3. Then multiply these values
together. Good ole ohms law (v=i*r). If you end up getting about .16V
then there is your drop...
~Brett
On Wed, 2009-08-19 at 22:38 -0700, Robin Diane
wondering what this means:
with the latest beta firmware i measured the voltage across ACC pin 2
and ground and got 4.95v on my dmm... i then set that number into
the Config:ADC REF setting.
my K3 now shows the supply voltage as being 13.6 volts, but when i
measure the supply at the output
2 matches
Mail list logo