tried
it, several upgrades ago, I was not pleased with it on tx.
Randy
K8RDD
- Original Message - From: Dave G4AON elecr...@astromag.co.uk
To: elecraft@mailman.qth.net
Sent: Monday, January 19, 2009 3:33 PM
Subject: Re: [Elecraft] Elecraft K-3 SSB and AM Squelch
Can you also look
Dave, I emailed K3Support and they say that the AM transmit is 100% Are you
sure it's not a setup issue? Any more than 10w will be a problem, as well any
compression on AM, not good, and AM is very Mic Gain and microphone
sensitive. What say? !!! Firmware version 2.38 (Sept 2008) included
Any word when SSB AM squelch will be available ?
Tnx Phil
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
I just moved it up on the list. Probably next month.
73,
Wayne
N6KR
On Jan 19, 2009, at 11:32 AM, Phillip Buckholdt wrote:
Any word when SSB AM squelch will be available ?
---
http://www.elecraft.com
___
Elecraft mailing list
Post to:
Can you also look at putting AM compression back at this time too?
73 Dave, G4AON
K3/100 #80
I just moved it up on the list. Probably next month.
73,
Wayne
N6KR
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
To: elecraft@mailman.qth.net
Sent: Monday, January 19, 2009 3:33 PM
Subject: Re: [Elecraft] Elecraft K-3 SSB and AM Squelch
Can you also look at putting AM compression back at this time too?
73 Dave, G4AON
K3/100 #80
I just moved it up on the list. Probably next month.
73
Firmware version 2.38 (Sept 2008) included compression on AM, since then
there has been none. I used to call into the local AM net but it's too
embarrassing now with everyone commenting on how poor the K3 sounds.
73 Dave, G4AON
K3/100 #80
Speaking of AM, how is everyone setting
7 matches
Mail list logo
