Gentlemen,
Is there any way to manipulate the transmitted audio when on FM using the K3???
Nothing in the
manual
suggests that it's even remotely possible, while of course when on SSB or AM it
can be
accomplished
using either TX-EQ or ESSB!
I ask this question because I work a club-rptr on
Is there any way to manipulate the transmitted audio when on FM using the
K3???
Tx EQ is applied.
You can adjust the deviation as well.
73,
Lyle KK7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Subject: [Elecraft] FM via K3
Gentlemen,
Is there any way to manipulate the transmitted audio when on FM using the
K3??? Nothing in the
manual
suggests that it's even remotely possible, while of course when on SSB or
AM it can be
accomplished
using either TX-EQ or ESSB!
I ask
Hi Jim,
Like you I find the K3 lacking on both FM and AM. The audio sounds thin.
The AM is lacking, in that with full mic gain and full compression I
only get about 85 percent modulation.
I would like to be able to control the audio as I can on SSB, which is
excellent. Any chance of having
Hi John, Jim,
I have noticed this problem with AM for some time, and hope that a
solution would soon be coming soon.
73
Bill Churchill AA1O
On Jun 23, 2009, at 3:05 PM, john petters wrote:
Hi Jim,
Like you I find the K3 lacking on both FM and AM. The audio sounds
thin.
The AM is
...I find the K3 lacking on both FM and AM. The audio sounds thin.
The Tx EQ is applied in AM and FM modes, so you should be able to tailor
it pretty nicely.
Some months ago (I don't know exactly when) the components in the Tx
audio path, and Rx headphone path, were changed to improve low
That's great news Lyle. It looks better on my monitor scope. I will
try it live on our AM gray hair net tonight. Thanks for the great work.
Bill AA1O
K3 287
K2 1740
On Jun 23, 2009, at 3:16 PM, Lyle Johnson wrote:
...I find the K3 lacking on both FM and AM. The audio sounds thin.
The Tx EQ
So does that mean that after some specific serial number there is
better LF response in both transmit and receive than earlier radios?
Is this a change that can be worked into the mods list, or would it
require replacement of the board(s)?
Grant/NQ5T
On Jun 23, 2009, at 2:16 PM, Lyle
petters
Cc: 'Elecraft'
Subject: Re: [Elecraft] FM via K3
...I find the K3 lacking on both FM and AM. The audio sounds thin.
The Tx EQ is applied in AM and FM modes, so you should be able to tailor
it pretty nicely.
Some months ago (I don't know exactly when) the components in the Tx
audio path
9 matches
Mail list logo