Reposting.
Make offer. Please reply ONLY off list.
For Sale: K3/100 and P3
Configuration details listed below.
Can be shipped or pick up in West Los Angeles near Santa Monica Airport.
Thanks - Steve WB6RSE
K3/100
Five 8-pole filters: 2.8, 1.8, 1.0, 500, 250
KAT3 ATU
KBPF3 General coverage RX
For Sale: K3/100 and P3
Configuration details listed below.
$3500 shipped CONUS. $3400 pick up in West Los Angeles near Santa Monica Airport
Please ** Reply ONLY off list **
Thanks - Steve WB6RSE
K3/100
Five 8-pole filters: 2.8, 1.8, 1.0, 500, 250
KAT3 ATU
KBPF3 General coverage RX Module
KDVR3
I have the following for sale:
K3 & P3 w/SVGA
Kit as ordered in April 2011:
K3 - SN: 05455
Original 2.7 kHz filter
Optional 400 Hz filter
KAT3 antenna tuner
KPA3 100-watt PA
ADDED LATER:
In about 2014 I added:
KSYN3A upgraded synthesizer
Later I had the factory add:
KRX3A second
FS: K3 & P3 w/SVGA
Kit as ordered in April 2011:
K3 - SN: 05455
Original 2.7 kHz filter
Optional 400 Hz filter
KAT3 antenna tuner
KPA3 100-watt PA
ADDED LATER:
In about 2014 I added:
KSYN3A upgraded synthesizer
In May 2015 I had the factory add:
KRX3A second receiver with KSYN3A
2.7
My new K4D has arrived! Thus, selling my trusty K3/100 and P3 combo. The K3 is
serial number 4359 and was built by me as a kit. The P3 is serial number 878
and was also built by me as a kit. Both have been in nearly daily operation
since being “born”. They’ve been in a non-smoking environment
My K3, P3 & SP3 station is for sale as a package. I use almost daily
for CW and 'some' FTxx Q's.
K3 (kit) - s/n: 90xx
Filters: 6K, 2.8K, 400, 200
KPBF3A - General Covreage Receiver
KBPF3A - 100-400 mhz kit
KSYN3A - upgraded synth
KXV3B - I/O option
KAT3 - ATU
KPA3 - 100w amp
KIO3B - USB I/O
One more shot here before it goes elsewhere.
Very nice, fully featured K3/100, P3 for sale. No dings, no scrapes, no dirt.
(Maybe some dust). $3395, shipped UPS.
Details and photos are at this link:
https://drive.google.com/file/d/1ejKV67rN9lfuHUoDgHPsd-Zn8SGumkpe/view?usp=sharing
Please
RemoteRigs and K3/0 mini are sold. Check out the following and make me an
offer:
*Original*
$2,149.95 K3/100-F1 K3 100W Xcvr. (Factory assembled) Serial #3746
329.95 KAT3-F 1 K3 ATU
109.95 KXV3A1 K3 RX Ant, IF Out & Xvrtr Int
649.95 KRX3
I've decided to downsize the shack and will be selling the following:
*Original*
*Prices*
$2,149.95 K3/100-F1 K3 100W Xcvr. (Factory assembled) Serial #3746
329.95 KAT3-F 1 K3 ATU
109.95 KXV3A1 K3 RX Ant, IF Out & Xvrtr Int
649.95 KRX3 1
Sorry if this shows up twice. I'm having some email problems...
I am helping Craig, NM4T, in selling some of his Elecraft gear. He is
dealing with a very serious illness. Below I will list what is available
and Craig's asking price, along with links to some pictures and short
videos. Payment
I am listing these for a Ham friend.
He uses his KX3 and these are surplus to his needs.
K3/100 $1895
P3 -- $595
W2 - $220
KAT500 --- $495
If interested, call me; or contact me off line. I am good in QRZ.
Ron Durie
WB4OOA
Elecraft K-Line
704-843-3681
I'm moving to the Flex 6600M so my entire station is up for sale. I'd like to
find someone in the Phoenix or surrounding area if possible but will consider
shipping if needed.
K3 - $1875
P3 Panadapter - $700
KPA500 Solid State Amp - $1700
KAT500 Antenna Tuner - $450 (sale pending)
Everything
Moving to a condo and have the following for sale.
K3, #758. 100w.
ATU, ANt tuner
KRX#, second receiver
KXV#B. I/O, receive ant board.
KDVR, digital voice recorder
KFL3A 500 matched CW filters
KFL3A 250 matched CW filters
Has upgraded DSP board $2800.00
P3 Panadapter w/SVGA
Well, I fouled up again.
The P3 and the KAT-500 are $1100 together.
Package for all of the equipment, including K3, P3, and KAT-500 should be
$3400.
Really bad day.
Quin, K8QS
__
Elecraft mailing list
Home:
I am leaving the hobby due boredom and poor propagation; offering my complete
K3 setup as a package sale. KX3 listed separately. K3 has all five filter
slots installed (250,400,2.8 plus AM and FM filters), Has general coverage
receiver, built-in autotuner, KXV3A and MH2 mic. P3 has P3SVGA
SOLD. Tnx.
Jack
W4GRJ
-Original Message-
From: w4grj [mailto:w4...@satterfield.org]
Sent: Saturday, August 01, 2015 7:41 AM
To: 'elecraft@mailman.qth.net'
Subject: RE: FS K3 P3
Last Time for this
For Sale K3 S# 3746 and P3 S# 1020 Both Factory Assembled
K3/100
KAT3 ATU
KRX3 2nd
Last Time for this
For Sale K3 S# 3746 and P3 S# 1020 Both Factory Assembled
K3/100
KAT3 ATU
KRX3 2nd Rcvr
KXF3A IF out and xverter for P3
2- KF3A 2.8k 8pole filter
KFL3A 1.8k 8pole filter
KFL3A 400 8pole filter
KFL3A 6k 8pole filter
KFL3B 13k FM filter
Included associated interconnect cables
Not buying K3S but I am selling my K3 S# 3746 and P3 S# 1020 Both Factory
Assembled
K3/100
KAT3 ATU
KRX3 2nd Rcvr
KXF3A IF out and xverter for P3
2- KF3A 2.8k 8pole filter
KFL3A 1.8k 8pole filter
KFL3A 400 8pole filter
KFL3A 6k 8pole filter
KFL3B 13k FM filter
Included associated interconnect
For Sale K3 S# 3746 and P3 S# 1020 Both Factory Assembled
K3/100
KAT3 ATU
KRX3 2nd Rcvr
KXF3A IF out and xverter for P3
2- KF3A 2.8k 8pole filter
KFL3A 1.8k 8pole filter
KFL3A 400 8pole filter
KFL3A 6k 8pole filter
KFL3B 13k FM filter
Included associated interconnect cables
Original cost over
For sale. My K3/100 (factory built with serial 707x), W2 wattmeter,
Signalink USB (with K3 jumper and cable), and P3 panadaptor. K3 is LOADED.
K3 has 100W PA, ATU, 2nd RX (SUB RX), DVR, two 2.7 (matched) file pole
filters two 2.1K 8 pole filters (for each RX), KXV3A (IF out/Transverter
Will ship to U.S. only and AK/HI may be a little extra. Sorry.
K5RHD
/randy
On Fri, Jul 18, 2014 at 10:01 AM, Randy Diddel k5...@arrl.net wrote:
For sale. My K3/100 (factory built with serial 707x), W2 wattmeter,
Signalink USB (with K3 jumper and cable), and P3 panadaptor. K3 is LOADED.
Just posted on eHam.net
http://eham.net/classifieds/detail/422589
73,
John WD1V
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
22 matches
Mail list logo
