-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
d...@lightstream.net
Sent: Saturday, October 10, 2015 4:43 PM
To: KY7M
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Frequency Not Synced for Diversity Receive
Lee,
A correction to my previous response
Hi Earl,
Be sure to set.
CONFIG:KRX3.ANT=BNC
73,
Mike K2MK
efortner wrote
> Hi Lee,
>
> I finished putting my k3s together last week and with help from Howard at
> the Elecraft discovered most of my problems were coming from a bad tcxo. I
> also have the sub receiver and want to do
Hi Lee,
Make sure that CONFIG: VFO LNK is set to OFF. Then when you have done a
hold on SUB button, see that the second decimal point is blinking.
Mine currently reads one dot eight one seven dot six seven. The dot between
seven and six is blinking indicating diversity mode.
You do not have to
I am setting up diversity receive using the AUX input for my receiving loop.
After holding the SUB button to turn on DIVERSITY, the speaker output is
obviously off between MAIN and SUB by a hundred Hz or more. I can hear the
same signal on the other speaker most of the time, but the tone is quite
Hello Lee,
Make sure that you have installed the latest production firmware (MCU
5.38) for your K3. There was an issue related to using dissimilar filters
in the main and sub-receivers, which caused what you are experiencing.
That has been fixed, first in beta firmware a while ago, and now in
Lee,
A correction to my previous response:
The fix for diversity w mismatched main/sub rx filters was actually
implemented in MCU 5.33 firmware back on 8-3-2015. Of course it's also in
the latest 5.38 firmware as well.
73,
Dale, WA8SRA
> I am setting up diversity receive using the AUX input
6 matches
Mail list logo
