____________________________________
I've purchased knobs for my K2, K3, and KX3 from _www.73cnc.com_ (http://www.73cnc.com/) . They even modified a K2 knob to fit my K3 VFO B shaft. Much better than the smaller VFO B knob! And all my knobs have the ball bearing spinner dimples. No connection with the company, just a happy camper. Mike AC6JA In a message dated 4/17/2014 2:07:35 P.M. Pacific Daylight Time, w3...@embarqmail.com writes: For those owners of newer K2s, be aware that the NEW K2 encoder (those with a board soldered to the back of the encoder) has a larger shaft diameter than the older K2 encoders. I mention this as a way of warning newer K2 owners that the normal "K2" knob may not fit your K2. The new encoder shaft diameter is the same as the K3 encoders, but the K3 VFO A knob is too large for the K2 and the K3 VFO B knob may be too small in diameter. Know what you have in your K2 before ordering a replacement knob. 73, Don W3FPR On 4/17/2014 4:53 PM, Dick, K2ZR wrote: > Review the link: http://www.73cnc.com/product_p/k2blkmain.htm > These folks make a great weighted knob for the K2. You can often pick it up > at hamfest where they are in the flea market. They generally offer a show > special for less. My guess is they will be at Dayton since trhey are located > in Ohio. > I've been a happy user. > 73, > Dick, K2ZR/4 > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to ac...@aol.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com