Bryan intended this to go to the reflector. See below:
73,
Don W3FPR
-------- Forwarded Message --------
Subject: Re: [Elecraft] K2 upgrade kit sequence
Date: Thu, 29 Oct 2020 17:41:33 +0000 (UTC)
From: Bryan Nehl <k0...@dbbear.com>
To: Don Wilhelm <donw...@embarqmail.com>
Don,
While the keying mod kit instructions haven't been updated, the K2
manual has been updated for the SMD diode on a carrier board
installation. Pg 60 of the Rev I k2 manual.
I was able to order all of the parts for the keying modification from
Elecraft.
Here is the list of parts:
Elecraft K2 Keying Modificaton Parts LIst
Ref Description Quantity Part Number
C31, C46 Capacitor, 0.01uf monolithic (103) 2 E530009
C45 Capacitor, 22uf Electrlytic 1 E530012
R22 Resistor, 82k, 1/4W, 5% (gray-red-orange) 1 E500119
R21 Resistor, 270k, 1/4W, 5% (red-violet-yellow) 1 E500101
MIsc Hookup wire, #24, green (used for insulation only) 4 inches
E760008
RF-D36 SMT1B,
pin diode supplied on pc
daughterboard 1 E120014
72 de Bryan, k0emt
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
