Check INRAD on the Vibroplex web page. They have the adapter, very well
assembled at a very reasonable price.
73, Mike WA5POK
On Wednesday, July 25, 2018 9:26 AM, Gary Smith wrote:
I have my father's Heil headsets and he
had an Icom adapter for it. I'm only using
Elecraft from now
uses the same as a Kenwood.
I am using my Kenwood with Heil Pro Micro and it works fine.
Bill
W3WGG
> On July 25, 2018 at 8:24 AM Gary Smith wrote: > > > I have my father's Heil
> headsets and he > had an Icom adapter for it. I'm only using > Elecraft from
> now on and need an adapter > to fit
Gary,
The adapter is the same as the one for Kenwood - Heil AD-1-K to use with
the Front Panel mic jack.
Or you can just plug the microphone and phones into the rear of the
K3/K3S - no adapter required.
You will need to turn bias on - that microphone has the same electret
element as the
Darn auto correct!!! Heil not here. G!
Bob, K4TAX
Sent from my iPhone
> On Jul 25, 2018, at 8:32 AM, Bob McGraw K4TAX wrote:
>
> Here has them available. You can get the parts and build one. Or it should
> plug in direct on the back of the K3. That is my choice.
>
> Bob, K4TAX
>
Here has them available. You can get the parts and build one. Or it should
plug in direct on the back of the K3. That is my choice.
Bob, K4TAX
Sent from my iPhone
> On Jul 25, 2018, at 8:24 AM, Gary Smith wrote:
>
> I have my father's Heil headsets and he
> had an Icom adapter for it.
I have my father's Heil headsets and he
had an Icom adapter for it. I'm only using
Elecraft from now on and need an adapter
to fit the K3/K3s mic pin configuration.
I can put one together if I buy the parts
on fleabay (No more Radio Shack for local
small part access) but if there is a good
6 matches
Mail list logo
