what are you using to connect, presumably we are talking USB to Serial
adapter?
Have you got the latest drivers for this.
Although you don't say, I assume you normally have no trouble in doing
an upgrade?
73 de M0XDF, K3 #174, Mac
--
There are three truths: my truth, your truth, and the truth
id, W4SMT
--- On Wed, 12/10/08, Dick Dievendorff <[EMAIL PROTECTED]> wrote:
From: Dick Dievendorff <[EMAIL PROTECTED]>
Subject: RE: [Elecraft] Help -- stuck in MCU LD
To: "'Grant Youngman'" <[EMAIL PROTECTED]>, "'Elecraft Reflector'" >
Dat
have you tried a reboot of the Mac?
--
It is almost impossible to carry the torch of truth through a crowd
without
singeing somebody's beard. -George Christopher Lichtenberg, scientist
and
philosopher (1742-1799)
On 10 Dec 2008, at 17:42, Grant Youngman wrote:
Done several times. NO cha
Done several times. NO change.
Except now, I can test the port and got a good test at the right
speed. The TX LED goes out, and the delta-F led comes on solid. WHen
I try to upload firmware I get "K3 not responding". So it responds,
then it doesn't.
I don't have a good feeling about t
Sent: Wednesday, December 10, 2008 9:21 AM
To: Elecraft Reflector
Subject: [Elecraft] Help -- stuck in MCU LD
Trying to put in 2.72. Something crashed and caused a loss of
communication the initial attempt, and the radio is stuck in MCU LD.
Went through the procedure for forcing bootloads in th
Trying to put in 2.72. Something crashed and caused a loss of
communication the initial attempt, and the radio is stuck in MCU LD.
Went through the procedure for forcing bootloads in the manual -- can
get to the red flashing TX LED, with MCU LD in the display (no
backlight). But nothing
6 matches
Mail list logo