: Sunday, August 08, 2004 6:42 PM
To: [EMAIL PROTECTED]
Cc: 'Elecraft Discussion List'
Subject: RE: [Elecraft] K-2 Control Board Resistance Checks Fail
Thanks for the tip. That worked. One reads infinite, and the other 1.1meg
when I reverse the leads.
Nothing beats this reflector
Wruble
Cc: Elecraft Discussion List
Subject: Re: [Elecraft] K-2 Control Board Resistance Checks Fail
Hi
Try reversing the ohmmeter leads or changing ranges and see if the readings
look better. If not I wouldn't worry about it. You are mainly looking for
gross errors like very low readin
t Discussion List<mailto:elecraft@mailman.qth.net>
Sent: Sunday, August 08, 2004 1:07 PM
Subject: [Elecraft] K-2 Control Board Resistance Checks Fail
Hi all:
I am assembling K-2 S/N 4397. I have just completed the Control Board. Two
of the resistance checks fail. The resistance be
Hi all:
I am assembling K-2 S/N 4397. I have just completed the Control Board. Two
of the resistance checks fail. The resistance between the collectors of
both Q1 and Q2 to ground measure 454 K each. They are supposed to show
resistance >1meg to ground. I have checked resistor network RP1. I
4 matches
Mail list logo
