I just picked up a used K1 for my island location off the coast of
Connecticut and have pretty much worked through the menus - except for one -
the ATU. Before posting this I searched the reflector but could not find an
answer. There is no TUN mode available when I go into the ATU function so
If you do not have it, Philip, grab yourself a copy of the KAT1 manual
at http://www.elecraft.com/manual/KAT1_man_rev_C.pdf
That should give you all the info.
73
David G4DMP
In a recent message, nyartist [EMAIL PROTECTED] wrote ...
I just picked up a used K1 for my island location off the
Think of it this way:
KAT1 - AT inside a K1
KNB1 - NB inside a K1
KNB2 - NB inside a K2
KDSP2 - DSP inside a K2
KSB2 - SB inside a K2
ad infinitum
de Joe, aa4nn
I wish Elecraft had chosen a little more logical system of model numbers
for their accessories, one that began with the
Think of it this way:
KAT1 - AT inside a K1
KNB1 - NB inside a K1
KNB2 - NB inside a K2
KDSP2 - DSP inside a K2
KSB2 - SB inside a K2
OK then, so what is a KAT100?? (Rhetorical question only)
Mike / KK5f
___
Elecraft mailing list
Post to:
I have misplaced my manual for the K1ATU. I need to
d/l the manual for the ATU but can't find it on the
web page. Can anyone help?
Paul, KD3JF
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Paul,
The proper designation is KAT1, and the manual is available for download
from the Elecraft site.
Try http://www.elecraft.com/manual/KAT1_man_rev_C.pdf as a direct link to
the manual, or search the Manuals and Downloads section of the website
www.elecraft.com .
73,
Don W3FPR
It was written:
The proper designation is KAT1...
I wish Elecraft had chosen a little more logical system of model numbers for
their accessories, one that began with the model number of the rig to which
they apply. Thus, K1AT, or even K1-AT, rather than KAT1, for the K1 antenna
tuner. The
I have a K1 and the ATU died o 40, I get 9.9 and it will click but not
tune. It tunes the other three bands fine. Antenna is attic dipole
that works fine, other rigs tune it with no problem.
All the relays seem to click. Anyone ever have a band quit on the
tuner? What should I do?
Tnx Bill
8 matches
Mail list logo
