The K2 specification in the manual states that the band is 28.0 to
28.8MHz, Michael. Because of the design of the band pass filters,
transmitting outside that range will result in a lower power output.
I would say that your K2 is operating within spec.
73
David G4DMP
In a recent message,
- the adjustable inductors are shared between these
2 bands.
73,
Don W3FPR
- Original Message -
From: Michael J. Linden [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Monday, October 25, 2004 11:25 PM
Subject: [Elecraft] K2: Low 10M Output
I've just completed the alignment procedure for my
I've just completed the alignment procedure for my K2 and now find
that the radio can not achieve 10w across the 10m band. All other bands
easily achieve 10w from one end to the other. I'm running the K2 off of
a 13.8V supply. The K2 reports 13.2V on receive and 12.7 - 13.1V on 10m
transmit
3 matches
Mail list logo