Good Morning to All
Since there is no OpNote on this combination I thought I'd publish
what I've learned to date.
So far so good:
1. The combination is a K2 (QRP stock with all internal modules less
the ATU. No modifications to any module.) , RIGblaster pro, and an XP
configured machine
David,
I cannot fully answer your questions right now, BUT I must give you a
caution. The K2 AUX IO connector is *not* an RS-232 port - that is why
it is labeled AUX IO.
To avoid damage to your K2, use ONLY the cable shown in the KIO2 manual
to connect your K2 to the Rigblaster Pro.
In other
Evening All
I think it's time for a bit more of the combined wisdom of the list
before I proceed.
The rig is a K2. It has all the internal modules except the ATU at
this point. I have successfully used both HRD and K2 Remote to control
the K2.
The RigBlaster Pro is several years old.
3 matches
Mail list logo
