When keying up my K2 in SSB at 10 watts I get a momentary flash of high
current. Is this a sign of a problem? Seems like there is a setting in the
menu in regards to this, but want to be sure before I do anything. The
transmit is fine, just the momentary flash of high current.
Thanks!
Ken,
That may or may not be an indication of a problem. Check the CAL CUR
setting first - with the QRP K2 it should be set to 2.50 or higher - if
you have the KPA100 it must be set to 3.50 or higher.
Due to the way the K2 power is controlled, a low power source voltage
will cause a Hi Cur
2 matches
Mail list logo