hi all,
On 30 Sep 2007 at 22:12, Bob Boehmer wrote:
>
> I just configured my K2 for a Heil HM-iC.
>
> I bought the Heil Kenwood adapter cable for the mic.
>
> On the mic configuration header:
> connect AF to mic pin 1 and install a 5.6K resistor from AF to 5V
> connect PTT to mic pin 2 conne
Doug,
You must decide how you want to wire the K2's microphone configuration
header.
If you choose the Icom configuration, your Icom SM-8 microphone should
work fine - just plug it in. If you choose the Heil mic (any of the
Heil mics), order the adapter that matches the way you have the K2
Doug -
I just configured my K2 for a Heil HM-iC.
I bought the Heil Kenwood adapter cable for the mic.
On the mic configuration header:
connect AF to mic pin 1 and install a 5.6K resistor from AF to 5V
connect PTT to mic pin 2
connect GND to mic pins 7 and 8
I left all other mic pins unconnecte
I'm just about complete with KSB2. I'm thinking of setting the K2 up for
either the Icom SM-8 or the Heil HM-I mics. Looking at the chart on
page18 of the assembly manual - neither are listed. Does anyone know if
the setup for these mics is the same as the other Icom mics shown in
Table 2?
4 matches
Mail list logo
