Re: [Elecraft] K2 S/N 4787 First QSO

In a message dated 16/03/05 22:48:02 GMT Standard Time, [EMAIL PROTECTED] writes: The K2's I've tested fall down on LO phase noise performance. Also note that the K2 measurements on the Sherwood web site state that the receiver performance is limited by phase noise. I agree the RX

Re: [Elecraft] K2 S/N 4787 First QSO

The Sherwood Engineering data says that for the 2 kHz spacing dynamic range test, the K2's performance was limited not by nonlinearity (intermodulation distortion) but by the K2's oscillator phase noise sidebands. The same table says the same thing about the Ten Tec Orion's performance in the

[Elecraft] K2 S/N 4787 First QSO

Hi to everyone, Got the SSB and NB installed and decided it was time for that first QSO. A friend across town was happy to oblige. He was impressed with the audio. He recorded it and it sounds nice when played back. Received audio sounds a little tinnymaybe it is just my headphones and

RE: [Elecraft] K2 S/N 4787 First QSO

Jim, AB0UK wrote: Got the SSB and NB installed and decided it was time for that first QSO. A friend across town was happy to oblige. He was impressed with the audio. He recorded it and it sounds nice when played back. Received audio sounds a little tinnymaybe it is just my headphones and