Ron and Dick
I appreciate your interesting posts.
As Ron says AFSK is as clean as FSK if AF in level is set properly.
Last week end I enjoyed CQ WW RTTY contest with QRP K2 (5W)
One of major problem was that AF in level must be re-adjusted
each time when I change Band. This is not in the case of
hi Aki - absolutely right - for contest situations, it is especially
useful to not have to worry about readjusting the radio when changing
bands. But even for casual operating, its nice to be able to set the
mode and go, without having to make adjustments.
This past weekend, I operated the
On Mon, 2005-09-26 at 14:33 -0700, Jeff Stai wrote:
you cannot zero the RIT by computer command
Sure you can. Use the RC command.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
At 02:45 PM 9/26/2005, Brian Mury wrote:
On Mon, 2005-09-26 at 14:33 -0700, Jeff Stai wrote:
you cannot zero the RIT by computer command
Sure you can. Use the RC command.
u - OK, so I downloaded the K2 programmers reference, which I have never
looked at. If I understand correctly, that
On Mon, 2005-09-26 at 16:52 -0700, Jeff Stai wrote:
But, the K2 uses the last control action, so if I send an RC it will
clear a pot command, but as soon as I touch the pot it will use the
current pot position worst case is the next needed position for
the RIT knob is on the other side of
At 05:25 PM 9/26/2005, Brian Mury wrote:
- something I could probably get used to...
You might find the white line on the knob to be of use - at least you
can see where the RIT will jump to when you touch the knob.
yeah, if I'm looking at the knob...! adding something tactile to the knob would
6 matches
Mail list logo