Thanks Don, I think I can get a handle on most of that except the
swapping LSB/USB. If my interpretation is correct I should generally set
the K2 to RTTY without Rev and it'll automatically select LSB or USB
depending upon band? Rev would be used only in special circumstances?
I'll dig through
Dennis,
Yes, the K2 takes care of the LSB/USB swap for bands 15 meters and above.
Whether you want USB or LSB depends on the digital mode you are using.
Most modes work in USB (RTTY REV) just fine (some like PSK31 will work
with either), but RTTY itself typically uses LSB.
73,
Don W3FPR
On
On 2/20/14 at 6:33 PM, w3...@embarqmail.com (Don Wilhelm) wrote:
some [digital modes] like PSK31 will work with either [USB or LSB]
PSK is a good mode to get working first because it can be
inverted. You can use it to get all the details of computer --
rig connection working and then if
I'm trying to get my K2 (SN 5711) working on digital modes, initially
just WSPR. I have the fixed audio output wired to pin 5 of the Mic
header, going to a Signalink USB which is working fine. Audio in/out,
keying, all just fine. If I transmit on WSPR my signal is being heard on
80m whether
Dennis,
First a clarification - if the band is below 15 meters, RTTY is LSB and
RTTY REV is USB.
You don't have to worry about that on bands above 15 meters because the
K2 automatically makes the corrective swap, but when aligning the
filters, use a band below 15 meters so as not to mix the
5 matches
Mail list logo
