The "magic" is to check carefully to find ALL ways in which you have setup for
PTT.
This is a common problem and I'll bet you at least two PTT options set. The
software turns one off and stops sending data. But the other is controlled by
something else and didn't "get the memo".
Sent from
Jim,
I assume you have the KX2 (not the K2X).
For proper operation, you must have an indication on the ALC meter. 4
bars solid with the 5th bar flashing.
If you do not achieve that condition, the power output will be erratic.
Note well, that is the "NO ALC" point for the KX2, KX3, K3 and
Don,
Thanks. Gave up and used Vox. Can't see any ALC limiting, but can hear
outgoing signal on another radio. Still tweaking and haven't had first QSO
yet, but hope springs always!
73,
Jim N3SZ
On Tue, May 2, 2017 at 3:11 PM Don Wilhelm wrote:
> Jim,
>
> Are you using
Jim,
Are you using PTT and VOX both? If so, try only one.
With HRD, you can set PTT via command (no physical connection to the
hardware PTT line). That has always worked well for me, but I have not
tried it with the KX2.
73,
Don W3FPR
On 5/2/2017 2:26 PM, Jim Sr Sturges wrote:
First
Yes, Macros are in use, and yes, command is the last item in the
macro.
73
On Tue, 2 May 2017 at 14:36 Ian Kahn wrote:
> Are you using macros in DM780? Do you have the command in the
> macros, if you are?
>
> 73 de,
>
> --Ian
> Ian Kahn, KM4IK
> Roswell, GA EM74ua
>
Are you using macros in DM780? Do you have the command in the
macros, if you are?
73 de,
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik@gmail.com
10-10 #74624 North Georgia Chapter #2038
PODXS 070 #1962
K3 #281, P3 #688 KAT500 #860, KPA500 #1468
On Tue, May 2, 2017 at 2:26 PM, Jim Sr
First post. Connecting KX2 to HRD on Surface Pro 3 using provided ACC-USB
cable, and audio via cables to a USB sound dongle.
PSK-31 using USB mode on 20M: Receive works great. When I transmit, TX
light comes on, data is sent, but TX light stays on even though transmit
power drops to zero.
Would
7 matches
Mail list logo