Barry,
No, I didn't notice anything, but my understanding was that I needed to
make the update(s) to maintain compatibility between the control and
radio side.
Firmware updates have slowed way down over the last few years, but there
were a number of enhancements made within the period
Mitch:
> On Jul 26, 2018, at 3:45 PM, Mitch Wolfson DJ0QN / K7DX wrote:
>
> Dennis and Hisashi,
>
> I have updated my K3/0 from time to time using the newest firmware for the
> K3. Just connect the PC directly to the COM port and the K3 Utility will
> recognize and update it.th
I don’t think there is much in the box to update.
Sent from my iPhone
...nr4c. bill
> On Jul 26, 2018, at 11:27 AM, Hisashi T Fujinaka wrote:
>
> Did you hear anything? I'm wondering the same thing.
>
>> On Mon, 23 Jul 2018, Dennis Egan wrote:
>>
>> I have had a K3/0 for about 5 years now.
Dennis and Hisashi,
I have updated my K3/0 from time to time using the newest firmware for
the K3. Just connect the PC directly to the COM port and the K3 Utility
will recognize and update it.
73,
Mitch DJ0QN / K7DX
--
Mitch Wolfson K7DX / DJ0QN
10285 Boca Cir, Naples, FL 34109
Skype:
Hisashi:
Dennis:
As far as I can tell, there have been no firmware updates specifically released
for the K3/0 or the K3/I0-mini on the Elecraft website.
In the “Firmware and Software” page
(http://www.elecraft.com/software/elecraft_software_page.htm
Did you hear anything? I'm wondering the same thing.
On Mon, 23 Jul 2018, Dennis Egan wrote:
I have had a K3/0 for about 5 years now. In that time, I don't recall ever
doing a Firmware update on it. Does it require one?
What is the current firmware for the K3/0?
Dennis W1UE
--
Hisashi T
I have had a K3/0 for about 5 years now. In that time, I don't recall ever
doing a Firmware update on it. Does it require one?
What is the current firmware for the K3/0?
Dennis W1UE
__
Elecraft mailing list
Home:
7 matches
Mail list logo
