Yes I figured thats what was going on.. its a bit of an annoyance and would be
great to get a clear solution on it, but performance is ok despite the
incorrect display switch on the K3/0. If anyone resolves this please send a
shout out to the reflector with the correction steps.
glad to hear
After more testing, I see that, as stated previously, this is a display
problem. When in ssb mode and pressing PTT I am modulating the k3 even
though the k3/0 diplays cw mode.
--
View this message in context:
I am having this problem right now. Front panel PTT activation switches the
mode to cw from USB on the local radio only. Front panel XMIT button does
not do this. I don't have any computer (logging program) attached on either
end.
--
View this message in context:
CW+SSB is not enabled
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-0-to-K3-100-twin-issue-at-K6LRG-tp7567299p7580492.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
As far as I have been able to tell, this is an issue of the data display on the
K3/0. I have been using the system heavily in all modes of late, in fact I
have been remoting K6LRG as my primary station.
The K3 side is fine. it does not switch to cw mode. the symptop is that it
just displays
Thanks for the info, Chris. In this case, I think it is actually switching to
cw mode since it won't modulate with a mike that works just fine on the k3.
I'm new to this, so I'll do some more digging and see what I can find out.
73, Walt W0CP
--
View this message in context:
6 matches
Mail list logo
