The info,suggestions,and offers of help received on the problem are
certainly appreciated. They did help me get my thinking straight enough to
have success. The basic difficulty was that the operator didn't really
understand how the computer program interacted with the radio.
So it was
Hi Jim,
I had a similar experience with my K3 and ACLog from N3FJP. When I
contacted Scott I got the same reply. Of course, he never had an FT1000MP
like mine when he made my 'MP work with his software. I just got the
feeling that it's time for me to move to another program. His log worked
I think the RS232 data rate is set incorrectly in ACL - it should be 38.4.
The default ACL Elecraft rate (4.8) is based on the K2, whereas the default
data rate in the K3 is 38.4 (which you could set to 4.8). Anyway both the K3
and ACL have to use the same setting. You can also change the Stop
W0JFR wrote:
I think the RS232 data rate is set incorrectly in ACL - it should be 38.4.
The default ACL Elecraft rate (4.8) is based on the K2, whereas the
default data rate in the K3 is 38.4 (which you could set to 4.8). Anyway
both the K3 and ACL have to use the same setting. You can
I am an ACLog user and my K3 works just fine with that program. I suspect
that the baud rate is mismatched and that is causing your problem. I have
mine set to run 38.4K baud and the polling rate is set at 100 mS.
--
View this message in context:
I hope an ACLog user out there can give me a clue as to my trouble.
As a start the following is my description as sent to N5FJP(ACLog author).
...
There has been no success in interfacing my Elecraft K3 with my PC (XP OS)
when using your general
I hope an ACLog user out there can give me a clue as to my trouble.
...
My set up works fine, but I am using the KUSB cable that connects the K3 to
the USB port on my XP PC. Here are my AC Log settings in the Settings, Rig
Interface menu:
Rig
Mine works fine too with different settings using a straight thru cable to
the RS232 port on an old HP.
Rig = Elecraft
Comm port = 1
Baud Rate = 4.8k
8 data bits
1 stop bits
Connection Power = RTS
Polling rate = 2 sec
Mode by: Rig
73,
Bill NZ0T
W3CP wrote:
I hope an ACLog user out there
Hi Jim,
Just setup aclog with the K3. working great...
Have it set to port #1, Baud rate same as the rig(38.4), polling rate is 500
ms, on select rig I have elecraft and under that I have freq checked...
Don...w2xb
W3CP wrote:
I hope an ACLog user out there can give me a clue as to my
9 matches
Mail list logo
