Wayne Burdick
<n...@elecraft.com>
Sent: Wednesday, December 2, 2015 1:29 PM
To: Ignacy Misztal
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3/N1MM, freq jumps etc in CQ WW CW
I though we had fixed this for all remaining cases in rev. 4.55, but I'll
re-list it.
73,
Wayne
N6KR
On
Thank you for comments. I amy indeed use ` by chance although I have not done
SO2V by choice.
N1MM claims a bug in K3.
This is in
http://n1mm.hamdocs.com/tiki-index.php?page=Supported+Radios#K3_and_K3S:
*The K3 contains a firmware bug that was reported several times and never
been fixed which
It has happened to me as well.
Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ
Owner - Operator
Big Signal Ranch – K9ZC
Staunton, Illinois
Owner – Operator
Villa Grand Piton - J68HZ
Soufriere, St. Lucia W.I.
Rent it: www.VillaGrandPiton.com
email:
I though we had fixed this for all remaining cases in rev. 4.55, but I'll
re-list it.
73,
Wayne
N6KR
On Dec 2, 2015, at 7:40 AM, Ignacy wrote:
> Thank you for comments. I amy indeed use ` by chance although I have not done
> SO2V by choice.
>
> N1MM claims a bug in K3.
>
I checked my setting. It was SO1V all the time.
Regarding locks. I tried it again.
When running, press RIT then XIT. The display shows ERR KEY and the radio is
stuck in TX. Not big deal as I can turn it off and on. But weird.
This may be something to do with software PTT.
Ignacy, NO9E
Hi Ignacy,
Is it possible that when you decided to end your transmission you quickly
moved your hand to the ESC key and in the process accidentally touched the
Tilde key. With N1MM the tilde key turns on the SUB RX. Now in my case this
causes me to hear different stations in my right ear. But
Generally K3 worked very well. But I would like to report some problems.
This is with N1MM+
I interrupt a transmission with ESC. Periodically, I seem to hear completely
different stations with CQ called on my run frequency. Before I was getting
mad but now I know that K3 receives a different
Ignacy,
no problems like this in my setup overhere, all works flawlessly so I'd
assume it is something in your configuration. If A->B fixes it might it
be you have a SubRX that is (accidentally) turned on?
Please leave the button functions alone, I often switch on RIT during
transmit when
Sounds like you have the subRX. If you don't, ignore the rest of this
post. But assuming you do, the sudden frequency appearance has nothing
to do with the K3, all in MM logger. Check your setting in N1MM+ for:
Config tab: Sub receiver always on.
If you have "Sub rx always on" checked, if you
9 matches
Mail list logo