Re: [Elecraft] K3: past chirp report

arry Sent: Friday, January 20, 2017 5:10 AM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3: past chirp report Does the radio automatically go into chirp mode if it detects operation from Cuba? Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-past-chirp-

Re: [Elecraft] K3: past chirp report

for all you churp cops,,, tune around during th antique radio contest,, no rig circuit made after 1929 is used i use a hartley osc which can cherp out of the k3 pasband if i pushit over 3 watts to the antenna,,, it begains to sound real good Bob K3DJC

Re: [Elecraft] K3: past chirp report

an.qth.net] On Behalf Of Barry Sent: Friday, January 20, 2017 8:10 AM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3: past chirp report Does the radio automatically go into chirp mode if it detects operation from Cuba? Barry W2UP -- View this message in context: http://elecraft.365791.n2.nab

Re: [Elecraft] K3: past chirp report

Does the radio automatically go into chirp mode if it detects operation from Cuba? Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-past-chirp-report-tp7625892p7625920.html Sent from the Elecraft mailing list archive at Nabble.com.

Re: [Elecraft] K3: past chirp report

: past chirp report On this subject. I did notice a "chirping" signal during the NAQP last Sat. No idea of call, should have made a note I guess. Second time in a week I heard this on the air. Sent from my iPhone ...nr4c. bill > On Jan 19, 2017, at 2:09 PM, Doug Smith <d...

Re: [Elecraft] K3: past chirp report

On this subject. I did notice a "chirping" signal during the NAQP last Sat. No idea of call, should have made a note I guess. Second time in a week I heard this on the air. Sent from my iPhone ...nr4c. bill > On Jan 19, 2017, at 2:09 PM, Doug Smith wrote: > > Yup, that was

Re: [Elecraft] K3: past chirp report

This is not a factor in synthesizer switching. Both the old and new synths incorporate their own voltage regulators, preserve identical signal integrity down to a power supply voltage of around 9 VDC. That's about as low as the radio can go in any case. Wayne N6KR On Jan 19, 2017, at 2:11

Re: [Elecraft] K3: past chirp report

On Thu, Jan 19, 2017 at 2:09 PM, Doug Smith wrote: > 2) Voltage at the K3S is 13.8 key up and 13.2 key down; seems OK. Power > supply is a switcher which I’ve used for some years. > > 3) K3S is drawing 21.96 amps key down. (Not running 100 watts into the amp.) 2) that's too

Re: [Elecraft] K3: past chirp report

out it. > > 73, Ron AC7AC > > > > -Original Message- > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Doug > Smith > Sent: Thursday, January 19, 2017 11:09 AM > To: Elecraft Reflector > Subject: Re: [Elecraft] K3: past chirp report

Re: [Elecraft] K3: past chirp report

Hi, My remarks to bulleted items below: 1) Sounds good. 2) Where are these voltages measured? If they are measured outside the K3 with an accurate DVM, I would say they are marginal. If so, raise the key up voltage to 14.2V. If they are measured by the K3S' internal voltmeter they might be OK.

Re: [Elecraft] K3: past chirp report

e card. So my advice is that if you can't repeat what the OO observed, don't worry about it. 73, Ron AC7AC -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Doug Smith Sent: Thursday, January 19, 2017 11:09 AM To: Elecraft Reflector Subject

Re: [Elecraft] K3: past chirp report

Yup, that was me. There were some good suggestions made here and I’ve checked them all and I’m unable to get the K3S to chirp. So, at present: unable to replicate.. Some of the suggested things I’ve checked: 1) SWR at the K3S while driving the ACOM 1500 (same operating conditions) is 1.05 to

[Elecraft] K3: past chirp report

A few weeks ago, someone had received a chirp report. Did that ever get resolved? Dick, n0ce -- __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: