While I never suffered from the "audio drop" issue after shutting down
Log4OM, it seems that the new WSJT-X 1.7.0 produces the same effect when it
is terminated. My K3 goes absolutely silent. Touching the WIDTH control
brings audio back. WSJT-X is widely used, so hopefully there is a chance to
find
K3 s/n: 9013
MCU: 5.50
DSP: 2.87
FPF: 1.25
KIO3B upgrade installed: 06/09/16
Filters in slots 2-4: 6K, 2.8K, 400, 200
No Subreceiver.
I use the Log4OM application and since the installation of the KIO3B the
audio level drops very low when the Log4OM application is shut down. This
happens
YES! Thanks for all the correct responses. This link from Stewart
sums it up perfectly:
http://n2.nabble.com/K3-Narrow-CW-Filter-tp2258338p2258751.html
I had the RX EQ around my CW frequency set to +12. So, I reduced all
settings in a linear manner, by 12. After changing Menu AF Gain range
t; To: elecraft@mailman.qth.net
> Subject: [Elecraft] K3: audio drops at bandwidth .10 kHz
>
>
> Spotted perfectly on a CW signal, I narrow the BW from .15 to .10. I
> hear a click and the audio suddenly drops to about 1/3. S-meter
> reading stays the same.
>
> It didn't do
Spotted perfectly on a CW signal, I narrow the BW from .15 to .10. I
hear a click and the audio suddenly drops to about 1/3. S-meter
reading stays the same.
It didn't do this when the radio was new, but it has been doing it at
least since FW 2.78. I now have 2.82. My narrowest roofing filter
5 matches
Mail list logo