I have recently moved QTH and am now setting up my Elecraft radios in the new shack - in exactly the same configuration as at the previous QTH. No hardware changes, no firmware upgrades, same cable set. Everything is working fine with the K3/P3/KPA500/KAT500 combination, with one exception: The signals displayed on the P3 rarely exceed S1 on the scale even when the K3 S meter shows S9+. I have replaced the BNC - BNC cable connecting the K3 IF out with the P3 input. No change in signal level.
Is there a simple way to check the K3 IF output for correct operation so that I can home in on whether the issue is at the K3 or P3 end of the connection? Any pointers much appreciated! 73 David G3WGN M6O WJ6O -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
