...@mailman.qth.net On
Behalf Of Gary Hembree
Sent: Tuesday, 23 May 2023 00:48
To: Elecraft List Server
Subject: Re: [Elecraft] K3 Rotary encoder
N5NA has written an excellent account of replacing the small push-button
encoders.
https://www.n5na.net/s9y/index.php?/archives/26-Replacing-Elecraft-K3
N5NA has written an excellent account of replacing the small push-button
encoders.
https://www.n5na.net/s9y/index.php?/archives/26-Replacing-Elecraft-K3-Push-Button-Encoders.html
I have replaced all of these encoders in several K3 radios over the past
5 years. It is not a job for the
all as they are in a nasty place (most probably have to
remove the LED board but will have to look into it carefully).
73, Evert PA2KW
From: Kimo Chun
Sent: Sunday, 21 May 2023 18:48
To: David Pratt ; ev...@pa2kw.com
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Rotary encoder
On 21/05/2023 18:23, elecraft-requ...@mailman.qth.net wrote:
I think I have a defect rotary encoder on a K3.
It is the one used for setting the bandwidth (Hi/Width).
Anyone out here who knows the manufacturer / type number of this rotary encoder?
Google finds
I am no expert on this radio. However, I notice that the part Evert is
referring to is not the same or type of encoder/part that David mentioned.
I am only going by the visual representation in the manual.
The E850239 is one of two identical rotary encoders used for VFO A and B. I
purchased a
Several years ago I had a problem with one of my K3 encoders and
obtained a replacement E850239 from Elecraft under warranty. However, I
noticed that the two halves of the encoder had started to separate. They
were held together by small aluminium rivets. By carefully removing the
rivets, one
I think I have a defect rotary encoder on a K3.
It is the one used for setting the bandwidth (Hi/Width).
Anyone out here who knows the manufacturer / type number of this rotary encoder?
73. Evert PA2KW
__
Elecraft mailing list
Home:
7 matches
Mail list logo
