: [Elecraft] K3 SSB width control
probably can't tell the difference between 2.6 and 2.7 so it's
no real
hardship to keep the DSP 100z narrower, but it's a bit of a
niggle.
It's rather simple - above 2kHz the K3 uses 200Hz steps and
below 2kHz
steps of 100Hz.
If you tune down from 2.7kHz
Greg
I'll add my voice to M0XDF's comments. I have wasted many hours in
frustrated operating attempts and in trying to carefully document problems
only to be told that they were know.
In addition to bugs, we have seen repeated discussion of feature requests,
that go on and on until someone
I'm seeing K3 Width control behavior that's a bit of a head scratcher.
I've got the 2.8Khz filter, and the filter settings in config menu are all
normal. When I'm in USB or LSB with the passband centered and I rotate the
width control, my width options now are 2.3/2.5/2.7 (2.9 will switch
Hi Barry,
definitely know that I've previously seen 2.4/2.6/2.8 as the width options
and 2.8Khz for normalization but I can't seem to get there from here.
A known problem... Been around for many versions of firmware.
vy 73 de toby
___
Elecraft
Barry N1EU wrote:
I'm seeing K3 Width control behavior that's a bit of a head scratcher.
I've got the 2.8Khz filter, and the filter settings in config menu are all
normal. When I'm in USB or LSB with the passband centered and I rotate
the width control, my width options now are
probably can't tell the difference between 2.6 and 2.7 so it's no real
hardship to keep the DSP 100z narrower, but it's a bit of a niggle.
It's rather simple - above 2kHz the K3 uses 200Hz steps and below 2kHz
steps of 100Hz.
If you tune down from 2.7kHz: 2700, 2500, 2300, 2100, etc.
If you
Thanks Toby.
I think it would be helpful if we compile a list of known problems and
post them on the Wiki to help out new K3 owners.
Perhaps K3 owners out there could email me what they confidently know
to be known problems.
Thanks/73,
Barry
On Feb 5, 2008 9:58 PM, Toby Deinhardt [EMAIL
Same here. It will go back in my case to 2.5 and 2.7
after I push and hold NORM.
Mark
--- Barry N1EU [EMAIL PROTECTED] wrote:
Date: Tue, 5 Feb 2008 13:53:06 -0800 (PST)
From: Barry N1EU [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 SSB width control
I'm seeing K3
There is a page with issues on it on the Wiki
And a page with FAQs and a firmware error messages page etc
On 5/2/08 22:13, Barry N1EU [EMAIL PROTECTED] sent:
Thanks Toby.
I think it would be helpful if we compile a list of known problems and
post them on the Wiki to help out new K3 owners.
.
Mark
--- Barry N1EU [EMAIL PROTECTED] wrote:
Date: Tue, 5 Feb 2008 13:53:06 -0800 (PST)
From: Barry N1EU [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 SSB width control
I'm seeing K3 Width control behavior that's a bit of
a head scratcher.
I've got the 2.8Khz
: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 SSB width control
probably can't tell the difference between 2.6 and 2.7 so it's no real
hardship to keep the DSP 100z narrower, but it's a bit of a niggle.
It's rather simple - above 2kHz the K3 uses 200Hz steps and below 2kHz
steps of 100Hz
Of Toby Deinhardt
Sent: Tuesday, February 05, 2008 2:11 PM
To: G4ILO
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 SSB width control
probably can't tell the difference between 2.6 and 2.7 so it's no real
hardship to keep the DSP 100z narrower, but it's a bit of a niggle.
It's
12 matches
Mail list logo