: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dave Zeph
Sent: 22 February 2012 04:46
To: 'Igor Kosvin'; 'Bryon'; 'elecraft'
Subject: Re: [Elecraft] K3 Setup and CM500 Headset Questions
The K3 can apply BIAS to either the Front 8-Pin Microphone Connector
When using the Heil adapter, you will have to use the little battery
box supplied with the CM500 because the Heil adapter for Kenwood had a
capacitor in the mic lead which blocks the DC from the K3 bias supply.
Save yourself a lot of trouble, and plug he CM500 in the back
mic/phones jacks. Set
Setup and CM500 Headset Questions
Hello everyone. I have a couple questions for you. I have browsed the
archives and I was not seeing anything that was helping.
This is a new K3 to me, the guy before was primarily a CW operator. He did
not even own a mic. So I decided to buy the Yamaha CM500 headset
: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bryon
Sent: Monday, February 20, 2012 11:50 PM
To: elecraft
Subject: [Elecraft] K3 Setup and CM500 Headset Questions
Hello everyone. I have a couple questions for you. I have browsed the
archives and I
, 2012 23:30
To: 'Bryon'; 'elecraft'
Subject: Re: [Elecraft] K3 Setup and CM500 Headset Questions
The CM500 has electret condenser microphone. It require bias. If you want to
use front panel you have to use little battery box that came with the
headset. Just install the batteries and connect
Hello everyone. I have a couple questions for you. I have browsed the
archives and I was not seeing anything that was helping.
This is a new K3 to me, the guy before was primarily a CW operator. He did
not even own a mic. So I decided to buy the Yamaha CM500 headset and was
trying to get it all
Byron,
Go to the main menu and select rp AND tap the 2 button to turn bias on
that is needs by that mic. You do not need mic+line.
Gl
73
GREG
AB7R
On Feb 20, 2012 8:50 PM, Bryon nneg...@gmail.com wrote:
Hello everyone. I have a couple questions for you. I have browsed the
archives and I was
I am using the Heil AD-1K. http://www.hamradio.com/detail.cfm?pid=H0-003264
I would like to use the front panel.
Thanks,
Bryon
On Monday, February 20, 2012, Greg a...@cablespeed.com wrote:
Byron,
Go to the main menu and select rp AND tap the 2 button to turn bias on
that is needs by that
On 2/20/2012 10:11 PM, Bryon wrote:
I would like to use the front panel.
That's the hard way. The easy way is to plug the 1/8 connectors into the
rear panel jacks. The speaker can be turned on and off with the phones
connected through the menus (it's a toggle), and it's easy to assign
that
9 matches
Mail list logo
