Good day to all,
First of all:
K3 (812) arrived.
Ordered 21 Nov 2007
Order confirmation 22 april
Sent 24 april
Arrived 28 april
Let's see if reality meets expectations(I'll let you know)
I've finished the building procedure and in the process of calibration.
When calibrating the TCXO (1
Evert,
You did not spot the Firmware Notes entry in the Errata sheet. That
calibration method is not yet implemented. Use one of the other methods
for the time being.
73,
Don W3FPR
Evert Bakker (PA2KW) wrote:
Good day to all,
First of all:
K3 (812) arrived.
Ordered 21 Nov 2007
Order
As others noted, that is not yet implemented in firmware.
However, you still have 1ppm accuracy. Use method 1 or 2 to set the
oscillator on frequency.
When it's implemented, method 3 will allow you to get even higher stability
by compensating in firmware for the known variation in the 1 ppm
Thanks to all who responded!
Problem solved, K3 running (10W)
73's, Evert PA2KW
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Evert Bakker (PA2KW)
Sent: Thursday, May 01, 2008 13:10
To: 'Elecraft Reflector'
Subject: [Elecraft] K3 TCXO calibration
4 matches
Mail list logo
