Hello Elecrafters,
I have been spending some quality time tuning my vertical and getting the
bands closer to resonance today. I have gone into the Config Menu and
specified Tune Power to 10 W. All bands, 80-6 obey the setting BUT 15M, no
matter what setting 10, 25, 50, 100W, or NOR, it shows
Hello,
More info. I have checked the decimal point per one suggestion. I also
now noticed that running JT65 on 15M, it claims 100 watts (full power) even
if I set the power of the KPA3 to 15 watts. If I disable the KPA3 and run
the K3 at 10W is shows 10W. Looks like a PA problem of some kind.
, 2013 2:13 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Tune power issue on 15M only.
Hello,
More info. I have checked the decimal point per one suggestion. I also
now noticed that running JT65 on 15M, it claims 100 watts (full power) even
if I set the power of the KPA3
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Randy Diddel
Sent: Saturday, December 28, 2013 2:13 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Tune power issue on 15M only.
Hello,
More info. I have checked
...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Randy Diddel
Sent: Saturday, December 28, 2013 3:15 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Tune power issue on 15M only.
It looks like I spoke too soon. As soon as I got all settings redone
Tx Gain Calibrations must be performed - a pass - at the 5W level before
proceeding to the 50W level. If the Tx Gain Cal failed at the 5W level on
one or more bands, odds are one of the output or the driver devices are
failing.
Re-run the 5W Tx Gain Cal, copy the results to an email and send it
6 matches
Mail list logo
