W4TV
Sent: Tuesday, May 31, 2016 12:19 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 and Microham keyer II
Using Airlink Express (or any other digital program) I can get the
PTT LED on the Microham to come on but it doesnt bring the k3 into
tx.
*Which PTT LED?* There are tw
PTT1 LED comes
on.
Ideas please.
Thanks
Ross
ps: at least the incoming audio is working ok
-Original Message-
From: Joe Subich, W4TV
Sent: Tuesday, May 31, 2016 12:19 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 and Microham keyer II
Using Airlink Express (or any other
Using Airlink Express (or any other digital program) I can get the
PTT LED on the Microham to come on but it doesnt bring the k3 into
tx.
*Which PTT LED?* There are two PTT LEDs on microKEYER II (PTT1 which
is the mic PTT and PTT2 which is the ACC jack PTT) and one on the K3.
As documented
Advice please, I have the Microham working on receive, but I cannot get the
transmission side going for digital modes.
Using Airlink Express (or any other digital program) I can get the PTT LED on
the Microham to come on
but it doesnt bring the k3 into tx.
I have plugged the microham into the
Thanks for the information about setting up the Keyer, I would never have found
it as my unit came direct from the manufacturer.
I have 2 further questions:
(a) I have a sub rcvr in my K3 so I assume the plug marked sub RX goes to the
Sub Rx socket on the keyer?
(b) What does the the plug
5 matches
Mail list logo