Seasons Greetings one and all,
Well this year I officially became entitled to have senior moments and being
one who always takes up options for freebies, I decided my time had arrived
to test out how good a senior moment I could create.
So to all those who tried so hard to get my K3 to Tx some
It is OK to make a silly mistake. Just not good if it is too often..
If one never makes a mistake then one is never doing anything. Worse is
not admitting to a mistake. Enjoy the belly laugh and keep enjoying the
wonderful radio.
Aloha,
John KH7T
Gary Gregory wrote:
snip
in the end
Hello Gary,
I had problems wetting up at first also.
Here are my settings,
In mixw I have the cat set to Kenwood...model to elecraft k2..
my com port is set to #1 and baud rate is 38400 same as rig.
Have ptt via cat command checked
afsk in place of fsk checked.
In the sound card device is
You Should give Glenn a call at US Interface, as he was the best MixW
distributer around. He has helped me get my K3 set up with MixW and his
interface as well as the RigExpert interface. Just go to his website and
get his number. He is a great guy.
Craig K6ML
Gary Gregory-3 wrote:
He also has a GREAT interface. I am using it now.
Craig K6ML
Gary Gregory-3 wrote:
Thanks for the replies and settings etc. All to no avail sadly. The K3
will
work on CW but stubbornly refuses to TX on DATA A either RTTY or PSK31.
This was a factory built unit and if I was located
Thanks for the replies and settings etc. All to no avail sadly. The K3 will
work on CW but stubbornly refuses to TX on DATA A either RTTY or PSK31.
This was a factory built unit and if I was located near Aptos it would be on
it's way back to be checked out fully, sadly I live a little ways beyond
6 matches
Mail list logo
