Re: [Elecraft] K3 and Yamaha CM500

I use the rear panel mic jack for the microphone, but I use the front panel 1/4" jack (with an adapter for the headphones. I still have a MH2 mic plugged into the Kenwood compatible microphone jack on the front panel. What I get from this setup is: (1) The internal speaker goes on when I

[Elecraft] K3 and Yamaha CM500

I've heard good things about the Yamaha CM500 for the Elecraft K3. It also is quite attractively priced. However, I noted that it has two connectors, presumably one each for mic and headphones, mono and stereo respectively. However, my K3 is setup as follows: Line in| Line out

Re: [Elecraft] K3 and Yamaha CM500

s. > -Original Message- > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of > Chris Hallinan > Sent: Saturday, September 12, 2015 12:33 PM > To: <elecraft@mailman.qth.net> > Subject: [Elecraft] K3 and Yamaha CM500 > > I've heard good things abo

Re: [Elecraft] K3 and Yamaha CM500

On Sat,9/12/2015 11:32 AM, Chris Hallinan wrote: So, what are my options for using the CM500? Easy. Everyone I know of uses the rear panel Mic and Headphone jacks. That will mute the speaker by default, so I assign the SPKR+PHONES toggle to PF2. Also, you'll need to go into the menu to set

Re: [Elecraft] K3 and Yamaha CM500

Duh. I shoulda looked at the rear panel before asking. :-P On Sat, Sep 12, 2015 at 3:16 PM, Jim Brown wrote: > On Sat,9/12/2015 11:32 AM, Chris Hallinan wrote: > >> So, what are my options for using the CM500? >> > > Easy. Everyone I know of uses the rear panel Mic