It is useless if you run QSK CW. The time delay is too great.
John/K4WJ
ex KN8PXG K8PXG ZF2HZ
Sent from my iPad
On Dec 6, 2013, at 12:28 AM, Jim Brown j...@audiosystemsgroup.com wrote:
On 12/5/2013 7:43 PM, Chris Rutkowski wrote:
As to Jim K9YC's comment, I won't argue because I've never
all the clatter it just heard for hours.
Jim
WA9ZBV
--
Subject: Re: [Elecraft] K3 and a timewave Dsp 599zx
It is useless if you run QSK CW. The time delay is too great.
John/K4WJ
ex KN8PXG K8PXG ZF2HZ
Sent from my iPad
Jim,
What 'pounding of the relays' - that would not be coming from any
Elecraft gear, the T/R switching is all electronic and quite silent.
As for noise pops, are your settings for T/R delay set too short and
the receiver unmutes too quickly.
Properly adjusted, there should be no pops with
On 12/6/2013 4:11 PM, Don Wilhelm wrote:
Properly adjusted, there should be no pops with QSK.
That's the way it works for me too. That said, I don't run QSK in
contests -- I got tired of replacing the relay in the amp. No, I'm not
hot-switching, but I call CQ enough that I would be putting
Hi to all.Just wondered if anyone has used a Dsp 599 zx filter with a K3, and
what were the results.Thanks for any info...73 NK8A...Dave
__
Elecraft mailing list
Home:
On 12/5/2013 4:35 AM, Dave Wank wrote:
Hi to all.Just wondered if anyone has used a Dsp 599 zx filter with a K3, and
what were the results.Thanks for any info...73
All I can say is, Why would you want to? Years ago, I hooked one up
to a rig that didn't have any DSP or audio filtering,
Yes, I have hooked up a TimeWave 599ZX to the K3 and am very satisfied with the
results.
The audio amp in the K3 has significant audio hiss as I am using Bose QC-15
earphones with a good high frequency response.
The 599ZX has an excellent, low noise, audio amp. I set the 599ZX in the
I also have a DSP599ZX hooked up to my K3 on the main RX audio as well as a
DSP59+ on the subRx audio. Maybe over kill but I had the units available and
they ended up here. The main use was to give me two separate audio amplifiers
with level control that I could use for dual channel RTTY
@mailman.qth.net
Subject: [Elecraft] K3 and a timewave Dsp 599zx
Message-ID: col125-w25ac6197d658d8009b06eed0...@phx.gbl
Content-Type: text/plain; charset=iso-8859-1
Hi to all.Just wondered if anyone has used a Dsp 599 zx filter with a K3, and
what were the results.Thanks for any info...73 NK8A...Dave
On 12/5/2013 7:43 PM, Chris Rutkowski wrote:
As to Jim K9YC's comment, I won't argue because I've never used it
with a K3. I would just add that when you live in noise hell, audio
distortion is so far down the problem list as to not be relevant.
I never found that it did anything useful in the
I've found that clean audio is much easier to copy than
distorted audio. It's most noticeable when comparing transmitted
audios, but adding distortion in the receive chain can't help.
Cheers - Bill, AE6JV
On 12/5/13 at 9:28 PM, j...@audiosystemsgroup.com (Jim Brown) wrote:
On 12/5/2013 7:43
11 matches
Mail list logo
