Dick, you are on target about the TenTec reflector. The same thing is going
on at the FT-2000 reflector now. It seems every item warrants a flame from
someone who does not agree.
The Elecraft reflector is very tame compared to the FT-2000. Eric and Wayne
are to be credited for not only
WC1M:
The Orion does a good enough job with DSP that it isn't easy to distinguish
between 600Hz, 400Hz, or 200Hz.
Dick the K3 has a visual passband indicator that gives you an indication of
the passband in octaves (e.g.. ~250 Hz, 500 Hz and 1000 Hz for CW). I
doubt I'll miss reading BW to
Barry N1EU, regarding your comment about shape factor, I assume you know
about the K3 Context filter.
Yes Bill, and I look forward to seeing how it works. But the filter
slopes on the context filter are not adjustable either so we're
talking apples and oranges. If the firmware can support
Hi Dick and other contesters who might be potential buyers but who are
now concerned by Dick's post:
You said, but there are many parameters that need to be available
at-a-glance: both VFO frequencies, bandwidth, shift/PBT, RIT/XIT
power, vox, AGC, RF Gain, preamp, notch, NB, receive antenna
FWIW I am 99.9% sure that all these values will be available via the CAT
interface sooner or later.
Simon Brown, HB9DRV
- Original Message -
From: DOUGLAS ZWIEBEL [EMAIL PROTECTED]
Hi Dick and other contesters who might be potential buyers but who are
now concerned by Dick's post:
]
To: [EMAIL PROTECTED]
Cc: elecraft@mailman.qth.net
Sent: Friday, November 30, 2007 6:40 PM
Subject: RE: [Elecraft] K3 display for contesters
On the one hand, I've done a lot of contesting with the K3 since July and
have survived without these displays. Bandwidth is indicated in two ways,
both
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Ditto that Doug,
When I'm contesting with my K2 the only knob that gets twiddled is the
VFO with an occasional push of XFIL. I can't imagine a big gun station
holding sway on 20 meters moving anything on the rig. They sure don't
have to S+P like we
The notion that some/many serious cw contesters don't adjust
selectivity occasionally/often during a contest is absurd. When
you're keeping a run going in tough crowded conditions, with offending
stations moving in on you from either side, you tighten the receiver
up. When the offenders move
- Original Message -
From: Simon Brown (HB9DRV) [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Saturday, December 01, 2007 08:49
Subject: Re: [Elecraft] K3 display for contesters
FWIW I am 99.9% sure that all these values will be available via the CAT
interface sooner or later.
Simon Brown
to accommodate the operating needs of a wide variety of
users. My comments were posted to help facilitate that.
73, Dick WC1M
Message: 16
Date: Sat, 1 Dec 2007 08:28:03 -0500
From: DOUGLAS ZWIEBEL [EMAIL PROTECTED]
Subject: [Elecraft] K3 display for contesters
To: elecraft@mailman.qth.net
engineers,
don't have a lot of ego, and are committed to making the best product they
can.
That's the kind of company and product I want to invest in.
73, Dick WC1M
Message: 31
Date: Sat, 01 Dec 2007 09:54:07 -0600
From: R. Kevin Stover [EMAIL PROTECTED]
Subject: Re: [Elecraft] K3
of familiar issues.
I think Wayne and Eric can handle any amount of
criticism but always best put in a constructive
context. I enjoy this list, the people here, and the
Kool-Aid's tasty too. ;-)
[Elecraft] K3 display for contesters
Dick Green WC1M wc1m at msn.com
Sat Dec 1 23:34:01 EST 2007
Well
On Fri, 2007-11-30 at 18:09 -0500, Dick Green WC1M wrote:
N1EU recently posted a query about the lack of a full-time bandwidth
display. Many replied that all you have to do is turn a knob to see the
current bandwidth. Evidently, this also applies to a number of other
operating parameters,
:[EMAIL PROTECTED] On Behalf Of Dick Green WC1M
Sent: Friday, 30 November, 2007 15:09
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 display for contesters
N1EU recently posted a query about the lack of a full-time
bandwidth display. Many replied that all you have to do is
turn a knob
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Dick Green WC1M
Sent: Friday, November 30, 2007 3:09 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 display for contesters
N1EU recently posted a query about the lack of a full-time bandwidth
display. Many replied
N1EU recently posted a query about the lack of a full-time bandwidth
display. Many replied that all you have to do is turn a knob to see the
current bandwidth. Evidently, this also applies to a number of other
operating parameters, including output power(!)
This is all well-and-good for casual
16 matches
Mail list logo